Auction 21.11.1991

Christie's
London, South Kensington

Datum der Auktion: 21.11.1991

Zurück

Bild
An exhibition standard Stuart 'Swan' twin cylinder vertical reversing...

An exhibition standard Stuart 'Swan' twin cylinder vertical reversing launch engine built by M.E. Sparkes, Hornchurch - 14 X 18½in.(35.5 x 47cm

Los #: 2

Schätzpreis: 1.500 £ - 1.800 £

Datum: 21.11.1991

Bild
A finely engineered model four cylinder watercooled marine petrol engine...

A finely engineered model four cylinder watercooled marine petrol engine built to the designs of E.T. Westbury by E.M. Thomas -- 7./2 x 9in.(19 23cm) With overhead valves and camshaft, inlet/exhaust manifold and carburettor, distributor with advance and retard, external oil pump, plugs and disc

Los #: 3

Schätzpreis: 300 £ - 400 £

Datum: 21.11.1991

Bild
A well engineered model Stuart five pillar twin cylinder vertical reversing...

A well engineered model Stuart five pillar twin cylinder vertical reversing launch engine built by W.K. Walsome -- 6½ x 6½in.(16.5 x 16.5cm) With wood lagged cylinders 1in. bore x 7/8in. stroke, inlet and exhaust manifolds, draincocks, lever and quadrant operated Stephenson's link reverse

Los #: 4

Schätzpreis: 350 £ - 450 £

Datum: 21.11.1991

Bild
A well engineered rare model Stuart No.3 twin cylinder compound vertical...

A well engineered rare model Stuart No.3 twin cylinder compound vertical reversing launch engine -- 12 x 11½in.(30.5 x 29.2cm) With brass bound wood lagged cylinders 1½in. and 2in. bores x 1½in. stroke, main stop valve, transfer pipe, lever and quadrant operated Stephenson's link reverse, rear frame

Los #: 5

Schätzpreis: 1.200 £ - 1.400 £

Datum: 21.11.1991

Bild
A well engineered model Stuart vertical reversing triple expansion marine...

A well engineered model Stuart vertical reversing triple expansion marine engine, the unlagged cylinders 3/4in., 1 1/4in. and bores x 1in. stroke supported on eight pillars, draincocks, displacement lubricator, handwheel and screw operated Stephenson's link reverse, I.P. crosshead driven feed pump

Los #: 6

Schätzpreis: 250 £ - 350 £

Datum: 21.11.1991

Bild
An extremely finely engineered exhibition standard electrified display...

An extremely finely engineered exhibition standard electrified display model of a Stuart surface condensing vertical reversing eight pillar triple expansion marine engine built by E.M. Thomas. Measurements overall -- 16½ x 16½in.(42 x 42cm) With blued steel clad cylinders 3/4in., 1¼in. and 1¾in

Los #: 7

Schätzpreis: 1.200 £ - 1.800 £

Datum: 21.11.1991

Bild
A well engineered model small bore twin cylinder vertical launch engine...

A well engineered model small bore twin cylinder vertical launch engine with brass cylinders, inlet and exhaust manifolds, displacement lubricators, trunk type crosshead guides, disc cranks and disc flywheel, finished in green and polished brightwork; and a small bore single oscillating cylinder

Los #: 8

Schätzpreis: 80 £ - 120 £

Datum: 21.11.1991

Bild
A finely engineered small scale model single cylinder centre pillar beam...

A finely engineered small scale model single cylinder centre pillar beam engine of circa 1850 with cylinder 3/8in. bore x 1in. stroke, simple parallel motion, fluted column, spoked flywheel and multi-rope pulley. Finished in green and polished brightwork, simulated stone plinth and wood base; and a

Los #: 9

Schätzpreis: 150 £ - 200 £

Datum: 21.11.1991

Bild
A finely engineered model six-pillar single cylinder tank mounted beam...

A finely engineered model six-pillar single cylinder tank mounted beam engine 'Lady Stephanie' built by W.K. Walsome -- 8 x 9in.(20.3 x 24.2cm) With brass bound wood lagged cylinder 1/2in. bore x 1in. stroke, main stop valve, parallel motion with spilt brasses to drop links, barrelled fluted

Los #: 10

Schätzpreis: 450 £ - 550 £

Datum: 21.11.1991

Bild
A model single cylinder four pillar rotative beam engine with cylinder...

A model single cylinder four pillar rotative beam engine with cylinder 3/4in. bore x 2¾in. stroke, outward facing valve chest with separate steam ways, main stop valve, parallel motion, wire rope and gear driven governor, rod driven feed pump and spoked flywheel, finished in red and blue and mounted

Los #: 11

Schätzpreis: 200 £ - 300 £

Datum: 21.11.1991

Bild
A finely engineered and detailed well presented approx. 1:20 scale model of...

A finely engineered and detailed well presented approx. 1:20 scale model of the Weatherhill Pit winding Engine of 1833, built by W.K. Walsome -- 19in. x 14½in.(48 x 37cm) Complete with brass cylinder approx. 3/4in. bore x 2.14in. stroke, separate valve chest and steamways, crank driven lift-off

Los #: 12

Schätzpreis: 900 £ - 1.100 £

Datum: 21.11.1991

Bild
A steel model single cylinder centre pillar beam engine with cylinder 1½in...

A steel model single cylinder centre pillar beam engine with cylinder 1½in. bore x 2in. stroke, simple parallel motion, pierced disc flywheel and 'V' belt driven 6 v dynamo (H. Miller & Co. Ltd.) mounted on twelve turned columns on metal bed and wood base -- 12½in. x 16½in.(32 x 42cm); and a braised

Los #: 14

Schätzpreis: 120 £ - 180 £

Datum: 21.11.1991

Bild
An extremely finely engineered exhibition standard electrified display...

An extremely finely engineered exhibition standard electrified display model of an M.E. single cylinder centre pillar beam engine built by E.M. Thomas. Measurements overall -- 16½ x 18½in.(42 x 47cm) With cylinder 1¼in. bore x 2½in. stroke, centrally mounted steam chest with integrally cast steam

Los #: 15

Schätzpreis: 1.800 £ - 2.000 £

Datum: 21.11.1991

Bild
A brass model single cylinder, centre pillar beam engine with cylinder...

A brass model single cylinder, centre pillar beam engine with cylinder 1½in. bore x 2in. stroke, simple parallel motion, rod driven feed pump, pierced disc flywheel and rope pulley, mounted on twelve turned columns on brass bed wood base -- 12½ x 16.1/in.(32 x 42cm); and a Stuart No. 500 Babcock

Los #: 16

Schätzpreis: 100 £ - 150 £

Datum: 21.11.1991

Bild
A well engineered model single cylinder four pillar table engine built by...

A well engineered model single cylinder four pillar table engine built by W.K. Walsome -- 15½(39.5cm)high With brass bound wood lagged cylinder 1½in. bore x 2¼in. stroke, cylinder head lubricator, forked connecting rod with jibbed and cottered big end, gear driven watt type governor, linkage and

Los #: 17

Schätzpreis: 300 £ - 450 £

Datum: 21.11.1991

Bild
A well engineered model Stuart No. 7A single cylinder vertical stationary...

A well engineered model Stuart No. 7A single cylinder vertical stationary engine with cylinder 1in. bore x 1in. stroke, displacement lubricator, draincocks and spoked flywheel, finished in green and polished brightwork -- 7¾in.(29.5cm)high. Wood plinth

Los #: 19

Schätzpreis: 120 £ - 150 £

Datum: 21.11.1991

Bild
A model Stuart No. 4 single cylinder stationary engine with blued steel...

A model Stuart No. 4 single cylinder stationary engine with blued steel clad cylinder 1½in. bore x 1¼in. stroke, draincocks counterbalanced crankshaft, spoked flywheel and belt pulley, cast bed, finished in green -- 12¼in.(31cm)high

Los #: 20

Schätzpreis: 120 £ - 150 £

Datum: 21.11.1991

Bild
A well engineered model Stuart No. 4 single cylinder vertical engine with...

A well engineered model Stuart No. 4 single cylinder vertical engine with cylinder 1½in. bore x 1¼in. stroke, displacement lubricator, draincocks and pipework, main stop valve, spoked flywheel and cast bed, finished in green and polished brightwork -- 10¼in.(26cm)high

Los #: 21

Schätzpreis: 150 £ - 200 £

Datum: 21.11.1991

Bild
Another, similar, unpainted

Another, similar, unpainted

Los #: 22

Schätzpreis: 150 £ - 200 £

Datum: 21.11.1991

Bild
A single cylinder four pillar vertical stationary engine with cylinder...

A single cylinder four pillar vertical stationary engine with cylinder 1½in. bore x 1½in. stroke, draincocks, slipper type crosshead guides, disc crank, spoked flywheel and multi-rope pulley, finished in red and green -- 12½in.(32cm)high

Los #: 23

Schätzpreis: 80 £ - 120 £

Datum: 21.11.1991

Bild
A well engineered model Stuart No. 1 single cylinder vertical engine with...

A well engineered model Stuart No. 1 single cylinder vertical engine with cylinder 2in. bore x 2in. stroke, draincocks and pipework, main stop valve and spoked flywheel, finished in green and polished brightwork -- 14in.(35.5cm)high

Los #: 24

Schätzpreis: 250 £ - 350 £

Datum: 21.11.1991

Bild
A single cylinder vertical reversing stationary engine with cylinder 2¼in...

A single cylinder vertical reversing stationary engine with cylinder 2¼in. bore x 2in. stroke, lever and quadrant operated Stephenson's link reverse, draincocks, disc crank, flywheel and rope pulley, finished in green -- 17¼in.(44cm)high

Los #: 25

Schätzpreis: 80 £ - 120 £

Datum: 21.11.1991

Bild
A well engineered model Stuart 5A vertical stationary engine with single...

A well engineered model Stuart 5A vertical stationary engine with single cylinder 2 1/4in. bore x 2in. stroke with draincocks, counterbalanced crankshaft and spoked flywheel, finished in maroon and polished brightwork. Built by R.W.E. Martin -- 15½in. x 8½in.(39.3 x 21.5cm) wood base

Los #: 26

Schätzpreis: 250 £ - 350 £

Datum: 21.11.1991

Bild
A well engineered model Stuart 5A single cylinder vertical engine with...

A well engineered model Stuart 5A single cylinder vertical engine with cylinder 2¼in. bore x 2in. stroke, draincocks and pipework, main stop valve and spoked flywheel, finished in green and polished brightwork -- 15in.(38cm)long

Los #: 27

Schätzpreis: 300 £ - 400 £

Datum: 21.11.1991

Bild
A well engineered model single cylinder four pillar overcrank engine with...

A well engineered model single cylinder four pillar overcrank engine with brass bound wood lagged cylinder 1½in. bore x 2½in. stroke, draincocks, studded stuffing boxes, bar type crosshead guides, disc crank, the crankshaft mounted in two bearings supported on four doric columns, eccentric driven

Los #: 28

Schätzpreis: 200 £ - 250 £

Datum: 21.11.1991

Bild
A well engineered model single cylinder overcrank engine with brass bound...

A well engineered model single cylinder overcrank engine with brass bound wood lagged cylinder 1½in. bore x 2in. stroke, draincocks, studded stuffing box, forked connecting rod, piston and valve rod guides, the crankshaft mounted in two main bearings supported on four tapered columns with arches

Los #: 29

Schätzpreis: 180 £ - 220 £

Datum: 21.11.1991

Bild
A late 19th Century live steam brass and cast iron stationary steam set...

A late 19th Century live steam brass and cast iron stationary steam set with brass vertical centre flue boiler with water gauge, drain cock, filler plug, weight and lever safety valve (weight missing) whistle and main steam line with oiler to single cylinder horizontal engine with dummy governor

Los #: 30

Schätzpreis: 150 £ - 250 £

Datum: 21.11.1991

Bild
A model single cylinder horizontal stationary engine with slip eccentric...

A model single cylinder horizontal stationary engine with slip eccentric reverse and disc flywheel, unpainted -- 9½in.(24cm)long; and a single cylinder vertical reversing stationary engine with disc flywheel -- 10in.(25.5cm)high (2

Los #: 31

Schätzpreis: 60 £ - 80 £

Datum: 21.11.1991

Bild
A collection of well engineered model stationary engines including a Stuart...

A collection of well engineered model stationary engines including a Stuart S50 single cylinder mill engine; a Stuart shuttle valve feed pump and a twin cylinder shuttle valve feed pump with displacement lubricator, all finished in red (3

Los #: 32

Schätzpreis: 100 £ - 130 £

Datum: 21.11.1991

Bild
A well engineered model Stuart S50 single cylinder horizontal mill engine...

A well engineered model Stuart S50 single cylinder horizontal mill engine with cylinder 5/8in. bore x 1¼in. stroke, displacement lubricator and spoked flywheel, finished in green and polished brightwork -- 8½in.(221.5cm)long. Wood plinth

Los #: 33

Schätzpreis: 80 £ - 100 £

Datum: 21.11.1991